T-Metro 8104

• https://www.mef.net/Modular port fanout
• Built-in MPLS functionality
• Highly scalable, expand-as-you-grow solution to support a large number of services
• 100GE hardware OAM capabilities
• Expandable function blades
• Enhanced Quality of Service (QoS) and service granularity support
• MEF CE 1.0/2.0, IEEE, ITU-T and IETF standards compliance for multi- vendor
  interoperability
• Integrated with EdgeGenie Orchestrator for full network lifecycle management
• Extensive service redundancy (xSTP, FRR, G.8032, dual homing)
• Enhanced control plane and routing features (OSPF, IS-IS, BGP, LDP, RSVP-TE)
• Low power consumption to reduce OPEX
• Redundant hot-swappable AC/DC power supplies and fan
• Support for 19” and 23” racks
• 13.7” deep chassis for easy cabinet installation
• Support for short and long-haul optical interconnect

Hardware Characteristics

• 40xSFP+ or 4xQSFP28 + 40xSFP+ or 88xSFP+ port
  Wire speed non-blocking up to 1.2Tbps full duplex switching capacity in 2RU

Services

• IEEE 802.1Q bridging, IEEE 802.1ad Q-in-Q (TLS), MPLS L2VPN
• Full VPLS PE, MTU HVPLS, VPWS

Timing

• IEEE 1588v2 PTP
• Synchronous Ethernet
• External Timing Interfaces:
  • BITS in or out (1.544Mb/s, 2.048MHz and 2 Mb/s)
  • Frequency in or out (1.544MHz, 2.048MHz, and 10MHz)
  • 1pps and ToD in or out (NMEA 0183, MSTS)

Resiliency

• Sub-50ms RSVP-TE FRR, secondary LSP
• ITU-T G.8032, xSTP, resilient link, dual homing VPLS/HVPLS LAG (Static/IEEE 802.3ad LACP/Multi-chassis)

Quality of Service

• Per port/EVC/flow single/dual rate limiting
• Hierarchical rate limit per port/EVC/flow
• SP, WRR and hybrid frames scheduling, CoS marking and mapping per EVC

Multicast Management

• IGMP v1/v2/v3

OAM

• Hardware-based IEEE 802.1ag CFM, IEEE 802.3ah EFM

Testing and Monitoring

• ITU-T Y.1564 and RFC2544 test head and service performance analyzer
• In-service testing capabilities, ITU-T Y.1731 SLM/DMM per port/EVC/VLAN/COS, hardware-based flexible MAC-based loopbacks

Management

• Console, Telnet, SSHv2, Radius, TACACS+, SNMP v1/2/3, xFTP, NTP, DNS resolver

Network Protocols

• MPLS/L3: IS-IS, OSPF, BGP, RSVP-TE, LDP, Segment Routing
• L2: xSTP, G.8032, LACP, MC-LAG, L2-Tunneling

Security

• ACLs, RADIUS, SSHv2, SNMPv3, SFTP, port security, broadcast storm prevention, secure access

General Specifications

• Dimensions 2RU H x 19”W x 13.7”D (133.35 x 482 x 350mm)
• Weight: 9kg – 14.5kg
• Power: Dual redundant, hot-swappable AC or DC 24/-48VDC,
• Maximum power consumption: 400W
• Operating temperature: 0ºC to 50ºC
• Humidity: Up to 95%, non-condensing
• Fan: Load sharing, speed controlled, hot-swappable

Regulatory Compliance

• European CE marking, EN 55022 Class A, CISPR 22 Class A, EN55024:1998+A1, EMC Immunity,
  Harmonics: EN 61000- 3-2/ IEC 61000-3-2,
  Voltage fluctuations: EN 61000-3-3/ IEC 61000-3-3, ESD: EN 61000-4-2/ IEC 61000-4-2, RFI-AM: EN 61000-4-3/ IEC 61000-4-3, EFT: EN 61000-4-4/ IEC 61000-4-4,
  Surges: EN 61000-4-5/ IEC 61000-4-5,
  Conducted: EN 61000-4-6/ IEC 61000-4-6,
  Voltage DIP: EN 61000-4-11/IEC 61000-4-11,
  EMC Emissions, FCC 47 CFR Part 15 Class A, ICES-003 Issue 4 Class A (Canada), EN 300386, Telcordia GR-1089 issue 4

Environmental Compliance

• Full RoHS

Safety Requirements

• UL 60950, EN 60950, IEC 60950, IEC 60825-1, CSA 22.2 No. 950, Class 1 Laser product safety (eye safety)

• High-density business services and Carrier Ethernet network aggregator
• Multi-tenancy e-rate and education campus network aggregator
• Mobile backhaul carrier Ethernet/MPLS aggregator
• SDN networks with NETCONF
• Cloud gateway – Cloud-to-cloud and cloud-to-edge connectivity
• Cost-optimized DSLAM, CMTS, and OLTs aggregation
• Carrier exchange, interconnect

https://support.telco.com/